FUSB252GEVB Switch Evaluation Board

onsemi FUSB252GEVB Switch Evaluation Board is designed to be inserted between a board containing a Type-C controller (such as FUSB301 or FUSB302) and a voltage source for OVP testing. The test points on the CC pins will allow OVP test scenarios to test the device's intended function. An LED indicator will show an OVP condition, and the device should break the connection to the USB host. If there isn’t access to a Type-C voltage source, test points (GND and VDD) are available on the board for direct power supply connections. After performing OVP testing, the Type-C receptacle can accept a Type-C device, such as a memory stick, to demonstrate normal USB functionality (with SEL=L).

NO SE HALLARON RESULTADOS..
Intente modificar su término de búsqueda a continuación, o visite nuestro Centro de ayuda.
Sugerencias de búsqueda
  • Comprobar que el número del componente o las palabras clave estén escritas correctamente
  • Use menos palabras clave o palabras distintas
  • Busque 1 número de componente cada vez
  • Aplique 1 filtro cada vez
Productos y fabricantes
¿Alguna otra pregunta?