All Results (1,945)

Filters

Availability options
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (USD) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
SparkFun Raspberry Pi Hats / Add-on Boards Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board but that's ok because you will want to pre 84In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories USB Mini-B Cable 6" 270In Stock
A tariff of 38% may be applied if shipping to the United States.
Min.: 1
Mult.: 1

SparkFun WiFi Development Tools - 802.11 The SparkFun Arduino UNO R4 WiFi Qwiic Kit is a great way to start with Arduino and the Qwiic-connect system. This kit includes everything you need to build a WiFi-enabled project including an Arduino UNO R4 board an assortment of Qwiic-enabled sen 28In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This 3ft Category 6 (CAT 6) Ethernet cable is the solution to your internet working needs. With a speed of up to 500MHz you can connect to your LAN/WAN segments and networking gear at maximum speed. Also with its superior connector you get a cable t 9In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is the LM317TG voltage regulator a three-terminal positive regulator with a 1.2V to 37V adjustable output voltage. This adjustable regulator provides a local regulation internal current limiting thermal shut-down control and safe area protec 12In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories 1/6th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our bags of resistors. 25In Stock
A tariff of 30% may be applied if shipping to the United States.
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:620-625nm Red1.8-2.2VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](htt 67In Stock
A tariff of 22% may be applied if shipping to the United States.
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is the BC337 an NPN silicon BJT (Bipolar Junction Transistor). This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The BC337 is specifically rated at 50V and 800mA max
Datasheet
50In Stock
A tariff of 38% may be applied if shipping to the United States.
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a through-hole 12mm coin cell battery holder. It's the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. Metal housing is + PCB pad underneath is -.This battery holder is sold in single un 26In Stock
A tariff of 30% may be applied if shipping to the United States.
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Audio Jack 3.5mm 139In Stock
A tariff of 10% may be applied if shipping to the United States.
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty j Non-Stocked Lead-Time 13 Weeks
A tariff of 8% may be applied if shipping to the United States.
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories JST Right-Angle Connector TH 2-Pin
Datasheet
137In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table.Sold in packs of 10. Check below for matching screws. 4In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is the CR2025 20mm coin cell battery. You may be wondering what sets this guy apart from the more common CR2032 coin cell battery the answer is actually quite important. The CR2025 is actually 0.7mm thinner than the CR2032 and is only rated a
SparkFun SparkFun Accessories This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first which is fair since that is what they have been primarily used for. However with this battery holder you will gai 46In Stock
A tariff of 10% may be applied if shipping to the United States.
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Resistor 10K Ohm 1/4 Watt PTH - 20 pk 210In Stock
A tariff of 30% may be applied if shipping to the United States.
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Resistor 1M Ohm 1/4 Watt PTH - 20 pk 25In Stock
A tariff of 30% may be applied if shipping to the United States.
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as 10In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid it helps remove baked on residue (for when you melt your desk top) and helps prevent oxidation (the nasty black stuff) that accumulates on your solderi 10In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a high quality switching 'wall wart' AC to DC 5V 2000mA Barrel Jack wall power supply manufactured specifically for SparkFun Electronics. These are switch mode power supplies which mean the output is regulated to 5V and the capable output cur
Datasheet
N/A
A tariff of 30% may be applied if shipping to the United States.
Min.: 1
Mult.: 1


SparkFun SparkFun Accessories This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple item for any workbench or makerspace and with these cables you will be able to easily incorporate th 8In Stock
A tariff of 38% may be applied if shipping to the United States.
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories LED - Basic Red 3mm 49In Stock
A tariff of 22% may be applied if shipping to the United States.
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a black plastic bezel custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these bezels with two of the top bezels will create a 4x4 bezel appropriate for the full button pad.Documents:DimensionalMulti-Unit
Datasheet
13In Stock
A tariff of 30% may be applied if shipping to the United States.
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard green LED. The lens is 3mm in diameter and is diffused.Features:2.0-2.4 VDC forward dropMax current: 2 14In Stock
A tariff of 22% may be applied if shipping to the United States.
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories We all know that you can never get too many LEDs. Don't worry we've got you covered. This is a pack of basic red and yellow LEDs (10 of each) all conveniently packaged in a nice reusable ESD safe bag.Includes:10x - Basic Yellow10x - Basic RedDocumen 18In Stock
A tariff of 22% may be applied if shipping to the United States.
Min.: 1
Mult.: 1