Todos los resultados (1,667)

Clasificar pedido:
Categorías clasificadas por cantidad de resultados.
Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS
SparkFun Accesorios SparkFun The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40 right angle SMD pins. Add this part to your board to create a handy way to swap out micro:bits for p 9En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a high quality AC to DC 'wall wart' which produces a regulated output of 12VDC at up to 600mA. These are switch mode power supplies which means the output is regulated to 12V (no more 14V outputs!) and the capable output current is much high 2En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration. You should not need this adapter with any of our antennas or 11En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple item for any workbench or makerspace and with these cables you will be able to easily incorporate th 8En existencias
Se puede aplicar una tarifa de 38 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun LED - Basic Red 3mm 49En existencias
Se puede aplicar una tarifa de 22 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a black plastic bezel custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these bezels with two of the top bezels will create a 4x4 bezel appropriate for the full button pad.Documents:DimensionalMulti-Unit 13En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard green LED. The lens is 3mm in diameter and is diffused.Features:2.0-2.4 VDC forward dropMax current: 2 14En existencias
Se puede aplicar una tarifa de 22 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun We all know that you can never get too many LEDs. Don't worry we've got you covered. This is a pack of basic red and yellow LEDs (10 of each) all conveniently packaged in a nice reusable ESD safe bag.Includes:10x - Basic Yellow10x - Basic RedDocumen 18En existencias
Se puede aplicar una tarifa de 22 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:520-525nm Green3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle150-180 MCD outputDocuments:[Datasheet](h 62En existencias
Se puede aplicar una tarifa de 22 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This right-angle tactile switch has a great 'click' to it. Also because it's a through-hole design it's very sturdy. Mount it on the edge of your board for easy access. These are rated for 12VDC at 50mA. 52En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Surface Mount Right Angle Switch 88En existencias
Se puede aplicar una tarifa de 10 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Do you fear that your power may not be "far reaching" enough? How would another 3' work for you? Okay so it doesn't sound very dramatic but sometimes an extra 3' of power cable is exactly what your project needs. Don't hack apart a nice clean barre 7En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These plastic LED holders have a black finish and only need the LED and the holder to be snapped into place easily and effectively no screwing anything into place. These LED holders accept a 5mm LED and mount into an 19/64" diameter hole. 187En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don't worry it's easy enough to break it where you need! Each pin has a spacing of 0.1" in between each other.D 9En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LED RGB Strip Addressable, 5m 6En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun An adjustable potentiometer can open up many interesting user interfaces. With this rotary potentiometer just turn the dial and the resistance changes. This potentiometer from Bourns has a " metal knurled shaft diameter PC pin terminals no detent 6En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Female Headers 46En existencias
Se puede aplicar una tarifa de 10 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than 16En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed.This is for the female housing. Be 24En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Polarized Connectors Header 3-Pin 200En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware. 12En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don't stack. These are useful for Arduino compatible boards that 7En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun SD cards are all over the place and they're great for storing large amounts of data. Why not take advantage by adding an SD socket to your next data heavy project. We use it on a whole bunch of our boards! The SD/MMC ( Secure Digital Disk / Multi Med 8En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun You'll have no need for a screwdriver with this terminal! This is a 2-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm 9En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Thermistor 10K 17En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1