Todos los resultados (1,667)

Clasificar pedido:
Categorías clasificadas por cantidad de resultados.
Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS
SparkFun Accesorios SparkFun Amphenol FCI Clinchr Conn. (2 POS,M) 5En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun TRRS connectors are the audio-style connectors that you see on some phones MP3 players and development boards. TRRS stands for "Tip Ring Ring Sleeve " which reflects the fact that unlike a standard stereo connector this actually has three condu 100En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Break Away Male Headers Right Angle 16En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumper 6En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a right-angle 24-pin Molex Mini-Fit Jr. connector commonly used as the power supply connector on ATX motherboards. Two rows of twelve pins are broken out two rows of through-hole male headers. See the datasheet below for pin spacing dime 27En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a 3-pin through-hole PH series JST connector. The pins are spaced by 2mm.We really like the solid locking feeling and high current rating on these small connectors. This connector mates with our 3-pin jumper wire and may be useful for inter 15En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST. 2En existencias
20Se espera el 08/12/2026
Se puede aplicar una tarifa de 38 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut.Hookup / Related ProductSMA to BMC Male Cable RG316 - 1m 4En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp 116En existencias
Se puede aplicar una tarifa de 38 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.This is a 6-Pin female header.Documents:Datasheet 96En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet 16En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm 10En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change whil 2En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These needle tipped multimeter probes are great for attaching to multimeters power supplies oscilloscopes function generators etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn but tha 16En existencias
32Se espera el 09/09/2026
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Herramientas de desarrollo de interfaz FTDI Basic Breakout - 5V 87En existencias
Se puede aplicar una tarifa de 38 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
No
SparkFun Accesorios SparkFun This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications 261En existencias
Se puede aplicar una tarifa de 38 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
No
SparkFun Sombreros/placas complementarias Raspberry Pi Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board but that's ok because you will want to pre 84En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun USB Mini-B Cable 6" 274En existencias
Se puede aplicar una tarifa de 38 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Alligator Test Leads Multicolored 10 pac 186En existencias
Se puede aplicar una tarifa de 38 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Kits educativos We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of 25En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Herramientas de desarrollo NFC/RFID RFID Tag (125kHz) 84En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Gabinetes para informática de una sola placa This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas 5En existencias
Min.: 1
Mult.: 1
SparkFun Motores de DC These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri 10En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Terminales Quick Disconnects- Female 1/4 Pk of 5 348En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Alojamientos de cables y cabecera This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board. 87En existencias
Se puede aplicar una tarifa de 30 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1