Ezurio USB-SWD Programming Kit (453-00062-K1)
Ezurio USB-SWD Programming Kit (453-00062-K1) is a Multi-function debugging and programming tool for a wide range of Ezurio modules and devices based on Nordic Semiconductor silicon. The USB-SWD Programming Kit is compatible with Nordic-based wireless modules such as the BL600, BL651, BL652, BL653/BL653u, BL654/BL654PA, RM1xx Series, and Pinnacle 100. It also works with the Sentrius BT510, BT610, and BT710 sensors and MG100 gateways.
The USB-SWD Programming Kit includes a Main Board, which connects to a PC via USB. Programming of the target device can be handled by simple drag-and-drop using a hex/bin file. Any hex file can be programmed to the target device, including those supporting smartBASIC, Nordic nRFConnect SDK, MyNewt, MBED, and Zephyr RTOS.
Features
- Nordic Semiconductor-based modules supported
- BL600 series (nRF51822)
- BL651 series (nRF52810)
- BL652 Series (nRF52832)
- BL653 Series (nRF52833)
- BL653µ Series (nRF52833)
- BL654 Series (nRF52840)
- BL654 PA Series (nRF52840)
- RM1xx Series (nRF51822)
- Pinnacle 100 (nRF52840)
- Nordic Semiconductor-based end products supported
- Sentrius BT510 (nRF52840)
- Sentrius BT610 (nRF52840)
- Sentrius BT710 (nRF52833)
- Sentrius MG100 (nRF52840)
- Ezurio BL654 BME280 Sensor Board (nRF52840)
- Programming options
- Mass storage device with Drag-and-Drop hex/bin file
- Simultaneously program multiple 453-00062-K1 kits on a single PC
- Programming and debugging by pyOCD options
- Programming QSPI data from a hex file
- Royalty-free programming of modules
- Passthrough mode for Sentrius BT510 for use with an external programmer (such as a JLink)
- Simple USB connection to PC
- USB-powered
- Reset button
- UART interface
Documents
Kit Contents
- USB - SWD Kit Main Board
- TC2050-IDC Tag-Connect cable
- 10-pin to 10-pin flat IDC cable
- USB cable
- 2-pin jumper
Required Equipment
- USB-SWD Programming Kit (453-00062-K1)
- PC (Microsoft Windows, Linux, Mac supported)
- Target module, board, or sensor to program
- UwTerminalX
- pyOCD (instructions for install available on https://github.com/pyocd/pyOCD)
- MBED serial port driver (for Windows 7 only, newer versions of Windows do not need this driver, available at https://os.mbed.com/docs/mbed-os/v6.8/program-setup/windows-serial-driver.html)
Supported Modules
Ezurio BL600 Single-Mode BLE Modules
Featuring event-driven smartBASIC programming interface & Nordic Semiconductor nRF51822 chipset.
Ezurio BL651 BLUETOOTH® 5 BLE Modules
Feature the Nordic nRF52810 with Bluetooth 5 Low Energy capabilities and ultralow power performance
Ezurio BL652 BLUETOOTH® v5 + NFC Modules
Ultralow power devices designed to enable OEMs to add single-mode BLE to small, portable devices.
Ezurio BL653 Series BLUETOOTH® 5.1 802.15.4 NFC Modules
Allow for Industrial OEMs to implement long range BLE applications in harsh environments.
Ezurio BL654PA BLUETOOTH® v5 Modules
Offers design and development flexibility, performance, and exceptional processing capability.
Ezurio Pinnacle™ 100 Cellular Modems
Cellular End Device certified LTE-M and NB-IoT Modem with integrated BLUETOOTH® v5.
Supported End-Products
Ezurio Sentrius™ IG60-BL654-LTE Wireless IoT Gateway
Wireless IoT Gateway with full BLUETOOTH® 5, LTE Cat-1, and Wi-Fi® 802.11ac Wave 2 with 2x2 MIMO.
Ezurio Sentrius™ IG60-BL654 Wireless IoT Gateway
Wireless IoT Gateway with full BLUETOOTH® 5 and Wi-Fi® 802.11ac Wave 2 with 2x2 MIMO.
Ezurio Sentrius MG100 Gateways
Powered by Ezurio's Pinnacle™ 100 Modem.
Ezurio Sentrius™ BT510 Sensors
Rugged, multi-function Bluetooth 5 sensors for IoT applications.
Ezurio Sentrius™ BT610 I/O Sensors
Turns wired sensors into IP67-rated battery-operated wireless nodes.
Board Layout
