Texas Instruments UCC14130-Q1 Automotive Isolated DC/DC Module
Texas Instruments UCC14130-Q1 Automotive Isolated DC/DC Module is engineered to provide power to GaN, IGBT, SiC, or Si gate drivers. The UCC14130-Q1 integrates a transformer and DC/DC controller with a proprietary architecture to achieve high efficiency and low emissions. It can provide an isolated 12V output from a 12V regulated input for driving GaN and Si MOSFETs and an isolated 15V or 18V output from a 15V controlled input to bias the driver circuit for SiC MOSFET or IGBTs. The high accuracy provides better channel enhancement for higher system efficiency without over-stressing the power device gate.
The TI UCC14130-Q1 delivers up to 1.5W (typical) of isolated output power at high efficiency. The UCC14130-Q1 requires a minimum of external components and includes on-chip device protection. The module offers additional features such as input undervoltage and overvoltage lockout, output voltage power-good comparators, soft-start time-out, overtemperature shutdown, and adjustable isolated positive and negative output voltage. Furthermore, the device provides an enable and an open-drain output power-good pin.
Features
- Fully integrated high-density isolated DC/DC module with isolation transformer
- Isolated DC/DC for driving: IGBTs, GaN, SiC, and Si MOSFETs
- Input voltage range of 10V to 18V with 32V absolute maximum
- 1.5W output power at TA ≤105°C
- 1.0W output power for 10V <VVIN <18V at TA = 105°C
- Adjustable single or dual output voltages (using resistors) with < ±1.3% regulation accuracy over the full operating range
- Low electromagnetic emission with spread spectrum modulation and integrated transformer design
- Enable, Power Good, UVLO, OVLO, soft-start, short-circuit, power-limit, under-voltage, overvoltage, and over-temperature protection
- CMTI >150kV/µs
- AEC-Q100 qualified for automotive applications
- Temperature grade 1 of -40°C ≤ TJ ≤150°C
- Temperature grade 1 of -40 °C ≤ TA ≤125°C
- Functional Safety-Capable–Documentation available to aid functional safety system design
- Planned safety-related certifications:
- 5657VPK basic isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 3000VRMS isolation for 1 minute per UL1577
- Basic insulation per CQC GB4943.1
- 36-pin, Wide SSOP package
Applications
- Hybrid, electric, and power train systems (EV/HEV)
- Inverter and motor control
- On-board (OBC) and wireless charger
- Automotive DC/DC converter
- Motor drives
- Industrial Transport
- Grid infrastructure
- EV charging station power module
- DC charging (pile) station
- String inverter
- Merchant Server PSU
Device Comparison Table
Associated Products
Texas Instruments UCC14131-Q1 Isolated DC/DC Modules
Designed to provide power to GaN, IGBT, SiC, or Si gate drivers.
Texas Instruments UCC14140-Q1 3kVRMS Isolated DC-DC Module
A high isolation voltage DC-DC power module designed to give IGBT or SiC gate drivers power.
Texas Instruments UCC14141-Q1 5kVRMS Isolated DC-DC Module
A high isolation voltage DC-DC power module designed to give IGBT or SiC gate drivers power.
Texas Instruments UCC14240-Q1 Regulated Automotive DC-DC Module
High isolation voltage (3kVRMS) DC/DC module designed to provide power to IGBT or SiC gate drivers.
Texas Instruments UCC14241-Q1 Automotive Isolated DC/DC Module
Engineered to deliver power to IGBT or SiC gate drivers.
Texas Instruments UCC14340-Q1 Automotive Isolated DC/DC Module
Offers high isolation and is created to deliver power to IGBT or SiC gate drivers.
Texas Instruments UCC14341-Q1 Automotive Isolated DC/DC Modules
Offer high isolation and is developed to supply power to IGBT or SiC gate drivers.
Texas Instruments UCC15240-Q1 Automotive Isolated DC/DC Module
Provides high isolation and is designed to supply power to IGBT or SiC gate drivers.
Texas Instruments UCC15241-Q1 Automotive Isolated DC/DC Module
Provides high isolation and is designed to supply power to IGBT or SiC gate drivers.
Simplified Application
Typical Power-up Sequence
Functional Block Diagram
